■
Protect the appliance against moisture and liquid penetration.
■
The measuring pins are very sharp. Be careful when working with the appli-
ance. Always replace the protective cap on the appliance when it is not in
use. There is also a risk of personal injury!
For safe handling of batteries observe the following safety instructions:
■
Do not throw batteries into a fi re.
■
Never short-circuit batteries.
■
Do not attempt to recharge batteries.
■
Regularly check the condition of the batteries. Leaking battery acid can
cause permanent damage to the appliance. Special caution should be
exercised when handling damaged or leaking batteries. Risks from acid
burns! Wear protective gloves.
■
Store batteries in a place inaccessible to children. If a battery should be
swallowed, seek medical attention IMMEDIATLY.
■
If you do not intend to use the appliance for an extended period, remove
the batteries.
Component description
Protective cap / Test aid
Measuring pins
Display
Battery compartment
ON/SET button (On/Off switch / Measuring button)
Button
LED
Initial use
Items supplied and transport inspection
This appliance is supplied with the following components as standard:
▯
Construction materials- and wood moisture measuring appliance
▯
4 x 1.5 V Batteries (AAA/Micro/LR03)
▯
This operating manual
PBUH 1.5 B1
(LED on/off )
GB
19