10.2 Repair; 10.3 Returning The Device; Cleaning - Stahl YA60 Series Betriebsanleitung

The following tests and measures must be carried out during regular maintenance.
Check
the permissible ambient temperature
the enclosure components for formation
of cracks and damage.
its intended use
if the conductors are clamped properly
the cables for ageing and damage
the seals for ageing and damage

10.2 Repair

Danger due to improper maintenance/repair!
Explosion protection is impaired!
• Repair work on the device must be performed only by R. STAHL

10.3 Returning the device

Use the "Service form" to return the device when repair/service is required. On the
internet site "www.stahl-ex.com" under "Downloads > Customer service":
• Download the service form and fill it out.
• Send the device along with the service form in the original packaging to
R. STAHL Schaltgeräte GmbH.
11

Cleaning

• Clean the device only with a cloth, brush, vacuum cleaner or similar items.
• When cleaning with a damp cloth, use water or mild, non-abrasive, non-scratching
cleaning agents.
• Do not use aggressive detergents or solvents.
223846 / YA6060300010
2014-10-16·BA00·III·en·00
Schaltgeräte GmbH.
Measures
If exceeding the permissible ambient
temperature or falling below the device
must be taken out of operation.
Replace the exchangeable enclosure
components. If the enclosure components
are non-exchangeable, the device must be
taken out of operation.
If the device is not used according to its
intended use, it must be taken out of
operation.
clamp loose conductors tightly.
replace damaged or aged cables.
replace damaged, aged and porous seals
and completely change enclosure
components with foamed seal.
DANGER
Explosion Proof Audible Signal - 110 dB(A)
Series YA60
Cleaning
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
17