Play Media - AEG DVD 4556 LCD Bedienungsanleitung

English
42
Use the Remote Control
Load CD / DVD
Understanding the onscreen
CD menu
Understanding the onscreen
DVD menu
Start Playback
Pause Playback
DVD4556LCD_IM

Play Media

You transmit commands to the DVD-Player using the remote control. It is impor-
tant that the end of the remote control is pointed toward the DVD-Player.
1. Slide the OPEN button on the device (Fig. 1/2) in the direction of the arrow.
The CD / DVD compartment opens.
2. Insert the CD / DVD.
3. Close the CD / DVD compartment again. A moment later the loaded media
type is displayed (e.g. "DVD-VIDEO").
For CDs the following status information is displayed:
■
Current track / total number of tracks (1).
■
Time (2): Here you find information about playing time and remaining
time. By default the elapsed playing time of the current track is displayed in
minutes and seconds. Repeatedly press the DISPLAY (Fig. 3/4) on the remote
control for further time displays.
You have the following options:
- remaining time until the end of the track,
- elapsed playing time CD,
- remaining time until the end of the CD.
You may display the screen menu for DVD use by pressing the DISPLAY button
(Fig. 3/4).
■
Current title / total number of titles (1).
■
Current chapter / total number of chapters (2).
■
Time (3): Here you find information about playing time and remaining time.
By default the elapsed playing time of the current track is displayed.
The time is displayed in hours, minutes and seconds.
Repeatedly press the DISPLAY button (Fig. 3/4) on the remote control for
further time displays.
You have the following options:
- remaining time until the end of the title,
- elapsed playing time chapter,
- remaining time until the end of the chapter,
- display off.
1. Insert CD/DVD into CD/DVD-compartment
2. Press the " " button (Fig. 3/7) on the remote control.
NOTE:
If the play does not start up or the play quality is poor, check the default set-
tings on the DVD-Players.
1. Press the " " (Fig. 3/7) on the remote control. The playback is interrupted
and the current image is frozen.
2. Press the " " button (Fig. 3/7) on the remote control, to restart "normal"
play.
Page 42, "Load CD / DVD".
16.12.16