Warranty; Technical Specifications; Troubleshooting - Boneco U650 Gebrauchsanweisung

Storing the appliance for extended periods
Clean the appliance as described earlier and allow to dry
thoroughly. Preferably store the appliance in its original box,
in a dry place away from high temperatures.
Disposal
Return your worn out unit to your dealer for
proper disposal. You can obtain information on
other ways to dispose of the unit from your local
district or town council.

Troubleshooting

Problem Possible cause
Unit does not operate Power plug not plugged in
No water in the tank
(Empty indicator is on)
No mist output Desired humidity level lower
than actual
Cleaning agent residues
Weak mist output Water temperature too low
Mineral deposits on membrane
White deposit around the A250 AQUA PRO exhausted
appliance

Warranty

The warranty conditions are defined by our representative
in the country of sale. Please contact your dealer if, despite
strict quality control, your appliance becomes defective. You
must present your original receipt when making a claim
under the warranty. Repairs to electric appliances can only
be carried out by specialists. Through improper repairs,
considerable danger for the operator can result and war-
ranty claims lapse.
What to do
Plug in power plug into mains socket
Fill tank with water
Increase humidity setting
Rinse with clear water
Set mist output to maximum. The
appliance will work properly again
after 10 minutes.
Clean membrane
Replace A250 AQUA PRO

Technical specifications

Mains voltage
Power consumption
Humidity output
Suitable for rooms up to
Water capacity
Dimensions 280 x 240 x 355 mm
Weight (empty)
Operating noise level
Accessories
A7017 Ionic Silver Stick (ISS)
* when used with pre-heating to 80 °C
230 V ~ 50 Hz
en
29 / 32 / 110 W*
400 / 550 g/h*
60 m / 150 m
2 3
5.5 litres
4.0 kg
< 25 dB(A)
A250 AQUA PRO
23