Scope Of Delivery; Initial Operation - VOLTCRAFT VC-20 Bedienungsanleitung

Scope of delivery

Multimeter with permanently attached measuring leads
2 Cover plugs for the test prods
2 AAA batteries
Operating instructions

Initial operation

Prior to working with the measuring device, you have to insert the
enclosed batteries.
Insert the batteries as described in the chapter „Cleaning and Main-
tenance".
Rotary switch
The individual measuring functions can be set via the
rotary switch. If the rotary switch is set to „OFF", the
measuring device is switched off. Always turn the
measuring device off when it is not in use.
Attaching the test prods
Attach the test prods to the rear of
the device's housing when it is not in
use (protection during transport).
You can also attach the measuring
leads in a way that allows measure-
ments with one hand only.
Slide the two test prods into the rear
holder as shown on the diagram.
39