Connecting To A Tv Using An Hdmi (Digital) Cable; Tv Soundconnect - Samsung PS-WK450 Kurzanleitung

CONNECTING TO A TV USING AN HDMI (DIGITAL) CABLE

1. Connect an HDMI cable (not supplied) from the HDMI OUT (TV-ARC) jack on the bottom of the product to the
HDMI IN jack on your TV.
2. Press the button on the right side of the Soundbar or the SOURCE button on the remote control to select
the D.IN mode.
● HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
● If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
● We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose
diameter is less than 14 mm.
● Anynet+ must be turned on.
● This function is not available if the HDMI cable does not support ARC.

TV SOUNDCONNECT

You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the
TV SoundConnect function.
1. Turn on the TV and Soundbar.
2. Press the button on the main unit's right side or the SOURCE button on the remote control to select the TV
mode.
3. On the TV, a message asking whether to enable the TV SoundConnect function appears.
4. Select <Yes> using the TV's remote control to finish connecting the TV and Soundbar.
HDMI Cable
(not supplied)
HDMI IN
Connect
HDMI OUT
(TV-ARC)
HDMI IN
HDMI OUT DIGITAL AUDIO IN
(TV-ARC) (OPTICAL)
HDMI IN
DIGITAL AUDIO IN DC 24V
(OPTICAL)
USB (5V 0.5A)
Wi-Fi SETUP SPK ADD HDMI OUT
(TV-ARC)
AUX IN
21
CONNECTIONS