Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Contact block
Version
Contact arrangement
Contact opening
Contacts
Service Life
mechanical
electrical
Enclosure contact
Operating temperature range
Maximum switching
frequency
Ingress protection
Enclosure material
Cable glands
Connection
Terminals
Mechanical shock resistance
Tightening torque
If terminal sleeves are used, they must be gas-tight and applied with a
suitable tool.
131955 / 8070603300
S-BA-8070/1-02-en-29/10/2008
Slow-action contact
Snap-action contact
08667E00
8070/1-1
8070/1-2
Attention:
The positive opening function ¯ depends on the actuator used
08669E00
8070/1-3
08670E00
8070/1-4
2-pole, galvanically isolated, with double break action
) 1.5 mm (isolating distance ) 3 mm)
Silver-nickel
6
max. 10
operations
6
max. 10
operations
Polyamide, glass fibre reinforced
- 20 °C ... + 50 °C (10 A)
- 20 °C ... + 70 °C (6 A)
max. 6000 operations/h
IP65
Polyamide, glass fibre reinforced, black
8161/5-M 20-13
8161/5-M 25-17
On the enclosure
1 x M 20 x 1.5 resp.
bottom:
1 x M 25 x 1.5
On the enclosure
1 x M 20 x 1.5
side:
With cable glands 8161:
With mounted connecting cable: Plastic sheathed cable HK-SO-X05VV-F-OZ 4 x 1.5 mm,
2
2
1 x 2.5 mm
or 2 x 1 mm
, single-wire / finely-stranded
Snap-action contact:
2 g
Slow-action contact:
20 g
Screw terminals:
max. 0.4 Nm
Cover screws:
max. 0.7 Nm
Connection thread:
2.3 Nm (M 20 x 1.5)
3.0 Nm (M 25 x 1.5)
Pressure screw:
1.5 Nm (M 20 x 1.5)
2.0 Nm (M 25 x 1.5)
Slow-action contact, make before break
08668E00
8070/1-5
For plastic sheathed cable 4 x 2.5 mm
2
recommended 4 x 1.5 mm
cable length 6 m
Position Switch
8070/1
Technical Data
08675E00
2
(diameter 6 ... 13 mm);
5
Werbung
Kapitel
Inhaltsverzeichnis
