Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following instructions.
Use the product only as described and only for
the given areas of application. Keep these instruc-
tions safe. When passing the product on to a third
party, always make sure that the documentation
is included.
Package contents/
Names of parts (fig. A)
1 x Instructions for use
1 x rowing machine
1 x base frame (1)
1 x slide rail (2)
1 x foot, front (3)
1 x foot, rear (4)
1 x saddle (5)
2 x footrest (6a), (6b)
2 x leg, front (7a), (7b)
2 x leg, rear (8a), (8b)
1 x foot, middle (9)
1 x cockpit holder (10)
1 x safety bolt (11)
1 x bushing (12)
2 x stopper, multipart (13 a–c)
1 x cover panel (14)
1 x metal plate (15)
1 x locking pin (26)
1 x screw set
8 x screw M4 x 10 (16)
8 x screw M6 x 25 (17)
4 x screw M6 x 12 (18)
4 x nut M8 (19)
2 x screw M8 x 20 (20)
6 x screw M10 x 20 (21)
2 x screw M10 x 25 (22)
6 x nut M10 (23)
8 x washer M10 (24)
2 x spring washer M10 (25)
44
GB
1 x tool set
1 x open-end spanner
SW 13mm/SW 17mm (27)
1 x Allen key 6mm with
Phillips screwdriver PH2 (28)
1 x Allen key 5mm (29)
1 x Allen key 4mm (30)
2 x battery, type D 1.5 V (31)
Technical Data
Dimensions (W x H x D):
(open) approx. 223 x 106 x 58cm;
(folded) approx. 118 x 161 x 58cm
Weight: 35kg
Energy supply:
2 x 1.5 V
battery type D Mono/LR20
Rated power consumption: 130 mW
Non-speed dependent braking system
Risk of crushing your fingers!
Maximum load: 110kg
110
Maximum load of tablet mount: 2kg
Delta-Sport Handelskontor GmbH,
hereby declares that this product corre-
sponds with the following basic requirements, as
well as other important regulations:
2014/30/EU – EMC Directive
2011/65/EU – RoHS Directive
Full declarations of conformity are available
under http://www.conformity.delta-sport.com/
Date of manufacture (month/year):
11/2017
Equipment class: HC (for use in private
households, exactitude C)/not intended for
therapeutic training
Tested according to: DIN EN ISO 20957-1:
2014, EN 957-7: 1998