Step 3 Connecting The Unit - Sony VPL-VW500ES Kurzanleitung

Step 3
When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor
picture quality. When pulling out a cable, be sure to pull it out from the plug, not the cable
itself.
• Refer to the operating instructions of the connected equipment.
Right side of the unit
: Video signal flow
14
GB
Connecting the Unit
Equipment with HDMI
output connectors
HDMI cable (not supplied)
Use a high speed HDMI cable on which the cable type logo
is specified. (Sony products are recommended.)
For more information, refer to "Connections and
Preparations" in the Operating Instructions contained in
the supplied CD-ROM.
Computer
AV amplifier
Speakers
to HDMI output