Connecting The Unit - Sony VPL-XW7000ES Kurzreferenz

Step 3
When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor
picture quality. When pulling out a cable, be sure to pull it out from the plug, not the cable
itself.
• Refer to the operating instructions of the connected equipment.
Right side of the unit
: Video signal flow
When you monitor and control the projector via the network, access the Setup page of the
projector (refer to "Using Network Features" in the Operating Instructions) via a Web browser
and enable the desired control protocol.
14
GB

Connecting the Unit

Equipment with HDMI
output connectors
HDMI cable (not supplied)
Use a Premium High Speed HDMI cable on which the cable
type logo is specified.
For more information, refer to "Connections and
Preparations" in the Operating Instructions contained in
the supplied CD-ROM.
Computer
AV amplifier
Speakers
to HDMI output