Safety Recommendations - Eurocave WineArt Bedienungsanleitung

2

Safety Recommendations

Carefully read these operating instructions before using your appliance
and store them for future reference.
Using your appliance for purposes other than those specified in the operating
instructions could damage it.
- Never use your appliance for anything other than its specific purpose, as described
in these operating instructions.
- Unplug your appliance when it is not being used for long periods of time.
- Unplug your appliance before carrying out repair or maintenance work.
- Unplug it by gently removing the plug from the socket and not by pulling on the
power lead.
- Never use a split power lead or one showing signs of wear along the length.
A damaged lead should be immediately replaced. (Contact your retailer).
- This product must only be used with the power supply unit provided by the
manufacturer
- Never leave children unsupervised around the appliance.
- Check that the voltage of your electrical installation corresponds
to that of the mains transformer supplied with the appliance.
- Only use the mains transformer supplied with the appliance.
- Your appliance is only designed for indoor use (ideal ambient temperature for
operation is 18°C to 30°C ).
*
- If the power lead, plug or appliance appear to be damaged or do not function
correctly, contact an authorised after-sales service.
- Do not place the appliance, power lead or plug in water or any other liquid. Never
fill the appliance with water or other liquids.
- Do not allow the mains transformer's cable to hang over square corners and ensure
that it is out of reach of children.
- Do not place the appliance on a hot surface such as a hotplate, do not use it close
to a source of heat (radiator, naked flame, window...).
Do not let the power lead hang near to a source of heat.
- Place the appliance onto a flat, stable, non-flammable surface, at a suitable distance
from sinks or taps, to avoid splashes from water or other liquids.
- Do not obstruct the ventilation inlets at the back and sides of the appliance.
There must be a gap of at least 5cm between the ventilation inlets and walls
or objects.
*with a maximum ambient humidity level of 50%
-5-