Honda EM4500CXS Bedienungsanleitung Seite 63

Remote Control Kit
Using the remote control in wet conditions, such as rain or snow, or
near a pool or sprinkler system, or when your hands are wet, could
result in malfunction. Keep the remote control dry.
(degree of protection: IP3X)
1.Unscrew the four 6×10 mm flange bolts, and remove the side panel.
2.Remove the plug from the 6-pin
connector.
3.Connect the remote control cable to the 6-pin connector and remote
control box.
4.Pass the remote control cable through the cord grommet, and fit the
grommet into the cutout.
5.Reinstall the side panel using the four 6×10 mm flange bolts.
REMOTE CONTROL CABLE
CUTOUT
SIDE PANEL
REMOTE CONTROL BOX
60
CORD
GROMMET
50 mm
6-PIN CONNECTOR
6×10 mm FLANGE BOLT (4)
PLUG