Werbung
CO2 laser engraver is suitable for both personal and professional use.
When used in accordance with these instructions, it includes a Class 1
laser system, but some components are still very dangerous. Never
disable pre-in-stalled safety equipment and always use the laser safely and
responsibly.
Before operating the equipment, the user must carefully read the
operation manual and strictly abide by it. This manual is applicable to
multiple models of products.
This equipment uses international standard four types of lasers (strong
laser radiation). Laser radiation may cause the following events:
1.ignite surrounding combustibles.
2.During the laser processing, due to different processed objects, other
radiation and other toxics may be generated Harmful gas.
3.Direct laser radiation may cause personal injury. Therefore, the
equipment must be equipped with fire-fighting equipment. It is strictly
forbidden to stack flammable and explosive materials on the
workbench and around the equipment. At the same time, ensure good
ventilation. Non-professional operators are not allowed to approach
the equipment.
Laser processing objects and emissions should comply with local laws
and regulations.
Laser processing may have high risks, so you should carefully consider
whether the object is suitable for laser processing.
The internal laser equipment has high voltage and other dangers, except
for equipment operators, it is strictly prohibited to disassemble.
When the equipment is turned on, someone must be guarded,
unauthorized leaving is forbidden, and all power must be cut off before
personnel leave.
It is forbidden to open any door when the equipment is working.
Before starting operation, this equipment and other equipment must be
safely and effectively grounded.
Do not place any irrelevant total reflection or diffuse reflection ob
IMPORTANT NOTES
- 3 -
Werbung
