Derksen PHOS 160 Nutzungsinformation Seite 35

1. Safety instruc�ons
1.1. General understanding of safety
This LED projector is safely constructed and complies with
the legal requirements for product safety. The following
safety instruc�ons are intended to help you assess remain-
ing risks in order to avoid possible damage to property or
personal injury. This informa�on for use is an important
part of the product. Keep this document in a safe place for
future reference. Only pass the projector on to others to-
gether with this document. It provides important informa-
�on required for safely working with the product. Please
read the informa�on for use carefully before installing and
using the LED projector. Familiarise yourself in detail with
the chapters 'Safety instruc�ons' and 'Safety instruc�ons
regarding hazards from op�cal radia�on'. Always observe
the instruc�ons provided in the informa�on for use for all
work carried out. Any prevailing regula�ons on accident
preven�on and environmental protec�on, as well as any re-
cognised technical rules governing safe and proper work,
must also be observed. Competent handling and careful
maintenance have a significant impact on the performance
and availability of your projector. Installa�on and opera�ng
errors as well as inadequate maintenance cause health
risks and avoidable malfunc�ons.
PHOS 160
Safety instruc�ons
1.2. Intended use
PHOS 160 is an LED projector (hereina�er referred to as
'projector') for displaying graphics and text by light projec-
�on.
• PHOS 160 is mounted on surfaces such as ceilings,
floors or walls.
• The projector is suitable for use in humid environ-
ments, indoors and outdoors.
• The projector is not suitable for corrosive environ-
ments (e.g. factory farming, swimming pools, tunnels,
offshore installa�ons, coastal areas up to 1 km / 0.6
miles from the sea).
• The ambient temperature should not exceed 35°C /
95°F, otherwise the projector cannot be cooled suffi-
ciently and electronic components may fail prema-
turely.
• The projector is only suitable for use with projec�on
mo�fs made of glass, otherwise known as 'gobos'. Do
not insert any other projec�on mo�fs or objects in the
projector! Unsuitable projec�on mo�fs can damage
the projector and cause a fire.
• When using the projector, make sure that no people
are blinded by the bright beam of light, especially if
there is a safety risk posed by temporary glare (e.g. for
road users, people using stairs, etc.).
• The projector is intended for professional use only.
Consumer use is not intended. Only the owner and
trained personnel who are aware of all poten�al risks
posed by op�cal radia�on are authorised to install and
operate the projector. Please also observe the safety
instruc�ons on hazards due to op�cal radia�on.
• Do not modify or dismantle the projector. Otherwise,
it may no longer meet the safety requirements. Users
may only perform the ac�ons described in this inform-
a�on for use. Repairs may only be carried out by the
manufacturer.
• The manufacturer does not accept any liability for
damage caused by improper use or installa�on.
35