It is recommended to clean both the filters of the inlet hose and valve twice a year to remove any
deposit, collected over the time. Proceed as described in following diagrams to clean filters:
1
2
3
20°
15.12 Emergency drain
If the appliance cannot drain the water, carry
out the same procedure, described in
45°
•
Close the water tap.
•
Remove the water inlet hose from the water
tap.
•
Clean the filter in the inlet hose with a stiff
brush.
•
Remove the inlet hose behind the appliance.
•
Clean the filter in the valve with a stiff brush or
a towel.
•
Install again the inlet hose. Make sure that the
couplings are tight to prevent leakages.
•
Open the water tap.
'Cleaning the drain pump' paragraph. If
necessary, clean the pump.
ENGLISH
93