Werbung
2. Remove the cardboard top and the other
packaging materials.
3. Remove the internal film.
4. Open the door, remove the piece from the
door seal and all the items from the drum.
5. Carefully put the appliance down on its
rear side.
6. Put the front packaging element on the
floor under the appliance.
Make sure not to damage the hoses.
7. Remove the protection from the bottom.
8. Pull up the appliance in vertical position.
9. Remove the power supply cable and the
drain hose from the hose holders.
It is possible to see water flowing
from the drain hose. This is due to
the testing with water of the appliance
in factory.
1
2
ENGLISH
63
Werbung
