Fuxtec FX-RM4180 Bedienungsanleitung Seite 33

Manual_FX-RM4180_Int24_Rev3
Mounting the wheels and adjusting the cutting height
Push the grub screw (fig. 1) through the wheel.
Select the desired cutting height and screw the wheel into the corresponding hole
(Fig. 2+3)
Cutting heights: A: 25mm B: 40mm C: 55mm.
Put on the wheel cover (Fig. 4). Repeat this procedure for all four wheels. Make sure all four wheels
have been mounted at the same cutting height!
33