RIDGID RP 251 Press Tool Bedienungsanleitung Seite 6

RP 251 Press Tool
• Keep cutting tools sharp and clean. Pro-
perly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
• Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
• Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of
the tool in unexpected situations.
Battery Tool Use And Care
• Recharge only with the charger speci-
fied by the manufacturer. A charger that
is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
• Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
• When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects that can
make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
• Under abusive conditions, liquid may
be ejected from the battery; avoid con-
tact. If contact accidentally occurs,
flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid
ejected from the battery may cause irrita-
tion or burns.
• Do not use a battery pack or tool that
is damaged or modified. Damaged or
modified batteries may exhibit unpredict-
able behavior resulting in fire, explosion or
risk of injury.
• Do not expose a battery pack or tool to
fire or excessive temperature. Exposure
to fire or temperature above 265°F (130°C)
may cause explosion.
• Follow all charging instructions and do
not charge the battery pack or tool out-
side the temperature range specified
in the instructions. Charging improper-
4
ly or at temperatures outside the speci-
fied range may damage the battery and
increase the risk of fire.
Service
• Have your power tool serviced by a
qualified repair person using only iden-
tical replacement parts. This will ensure
that the safety of the power tool is main-
tained.
• Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or autho-
rized service providers.
Specific Safety
Information
WARNING
This section contains important safety
information that is specific to this tool.
Read these precautions carefully before
using the press tools to reduce the risk
of electrical shock, or other serious in-
jury.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE!
A compartment in the tool carrying case is
included to keep this manual with the tool for
use by the operator.
Press Tool Safety
• Keep your fingers and hands away from
pressing attachments during press cy-
cle. Your fingers or hands can be crushed,
fractured or amputated if they become
caught between the attachment or be-
tween these components and any other
object.
• Never attempt to repair worn or dam-
aged pressing attachments. Discard the
entire worn or damaged attachment.
An attachment that has been welded,
ground, drilled or modified in any manner
can shatter during pressing resulting in
serious injury. Failure to replace the entire
pressing attachment may result in compo-
nent failure and serious injury.
• Large forces are generated during pro-
duct use that can break or throw parts
and cause injury. Keep unnecessary per-
sonnel away from work area. Stand clear
999-995-443.09_REV. A