RIDGID RP 251 Press Tool Bedienungsanleitung Seite 4

RP 115 Press Tool RP 251 Press Tool
Safety Symbols
In this operator's manual and on the product, safety symbols and signal words are used
to communicate important safety information. This section is provided to improve under-
standing of these signal words and symbols.
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death
DANGER
or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death
WARNING
or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could result in minor
CAUTION
or moderate injury.
NOTICE NOTICE indicates information that relates to the protection of property.
This symbol means read the operator's
manual carefully before using the equip-
ment. The operator's manual contains
important information on the safe and proper
operation of the equipment.
This symbol means always wear safety
glasses with side shields or goggles while
using this equipment to reduce the risk
of injury.
This symbol indicates this is electrical
equipment meets the requirements of the
applicable EC directives.
This symbol indicates this is electrical
equipment that should not be disposed
of with household waste. See "Disposal"
section.
General Power Tool
Safety Warnings*
WARNING
Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE!
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work Area Safety
• Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
* The text used in the general power tool safety warnings section of this manual is verbatim, as required, from the
applicable UL/CSA/EN 62841-1 standard. This section contains general safety practices for many different types
of power tools. Not every precaution applies to every tool, and some do not apply to this tool.
2
This is information symbol and indicates
the product information available (includ-
ing operators' manual) by scanning the
adjacent QR code.
This symbol indicates the year of manu-
facture of the product.
This symbol indicates the risk of hands,
fingers or other body parts being crushed.
This symbol indicates the risk of electrical
shock.
This symbol indicates that RIDGID
RB-12XXX series batteries (such as the
RIDGID RB1225R and RB-1225) can be
USE RB-12XXX
Series
used with this equipment.
Li-Ion Only
• Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may
ignite the dust or fumes.
• Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
Electrical Safety
• Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
• Avoid body contact with earthed or
grounded surfaces, such as pipes, radi-
ators, ranges and refrigerators. There is
®
999-995-443.09_REV. A