Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DELUXE LINE 9800 S
EN
Malfunctions
Appliance does not work.
Appliance suddenly stops
vacuuming.
Appliance does not pick
up dirt.
Appliance is unusually
loud.
Possible cause
Appliance is not plugged in or
is not switched on.
No electricity at socket.
Power cord is damaged.
Possibly due to clogged suc-
tion paths, dirty filter or float
valve has been triggered be-
cause the max. level has been
reached.
Dust bag is full.
Filter is dirty.
Nozzle, tube or hose is
blocked.
Air regulator is open.
Selected vacuum power is
not suitable for the floor type.
Nozzle is not suitable for the
floor type.
Switch for carpet / hard floor is
not set for the floor type.
Particles are blocking the air
path. Float valve has been
triggered because the max.
level has been reached.
52
Remedy
Plug in the power plug and
switch on the appliance.
Test the vacuum cleaner on
another socket, where you are
certain that there is electricity.
Have the power cord replaced
by a Fakir / nilco service cen-
ter or a trained technician in
your country.
Switch off and unplug the ap-
pliance. Eliminate the cause
as blockaged or dirty filters,
etc.). Empty the tank
Replace the dust bag.
Clean or replace the dirty filter.
Remove the blockage.
Use a long wooden rod (e.g.
a broom handle), if necessary.
Close air regulator.
Set the vacuum power for
the floor type.
Attach the correct nozzle.
Set the switch for carpet / hard
floor for the floor type.
Remove the particles. Use
a long wooden rod (e.g. a
broom handle), if necessary.
Empty the tank.
Werbung
