Bauknecht BLVM 8100 Benutzerhandbuch Seite 37

SETTINGS
1. To change some display settings, select "SETTINGS" from the main menu by turning the "Functions"
knob.
2. Confirm by pressing
acoustic signal, display brightness, time, energy saving function).
3. Select the setting to be changed by turning the "Browse" knob.
4. Press button
5. Follow the instructions of the display to change the settings.
6. Press button ; a message appears on the display confirming your selection.
N.B.: when the oven is switched off, if the ECOMODE (energy saving) function is selected (ON), the display
switches off after a few seconds. If, on the other hand, the function is not selected (OFF), after a few seconds
the display is merely dimmed.
KEY-LOCK
This function can be used to lock the buttons and knobs on the control panel.
To activate it, press
buttons are locked and the display shows a message and the symbol
during cooking. To deactivate it, repeat the above procedure. When the key-lock function is activated, the
oven can be switched off by turning the knob to 0 (zero). In this case, however, the previously selected
function will have to be set again.
: the display shows which settings can be changed (language, volume of
to confirm.
and at the same time for at least 3 seconds. If activated, the functions of the
. This function can also be activated
GB35