7. Lay the refrigerator carefully.
Remove the Leg ( 1 ) and the Hinge Low ( 2 ).
8. Remove the screw ( 1 ) on the bottom right
side of fridge and freezer door. Switch Lever
Auto Closer ( 2 ) from right to the left.
before
after
9. Assemble the Middle hinge by the Phillips Head
(+) screwdriver. First of all, assemble the Freezer
door and Hinge Mid. And then assemble Hinge
Low and Fridge Door with Assy Hinge Up.
Assembling procedure of the Door
• Hinge Mid → Freezer Door → Hinge
Low → Fridge Door with Assy Hinge Up
Be careful not to injure yourself during
operation.
CAUTION
20_ setting up
DA68-02833Q-10.indb 20
10. Switch the position of Bottom hinge and Leg
(Right → Left).
Assemble the Hinge Low after putting the
Freezer Door in the middle hinge.
( 1 )
( 2 )
( 1 )
( 2 )
11. After removing a Cover control ( 1 ), switch the
Wire door ( 2 ) direction to opposite side on
Fridge Door (Display model only).
Assemble the Cover-Control with Screw ( A )
like a Picture ( 3 ).
( 1 )
( 2 )
( 3 )
( 1 )
( 2 )
( 3 )
• Disassemble the Guide auto close and
the Shaft-hinge ( 1 ).
• Assemble the Shaft-hinge and the the
Guide auto close like this Picture.
• Put the Cap Cover Control Panel ( 2 )
out from the Cover Control Panel ( 3 )
like the Picture.
( A )
( B )
2014. 3. 29.
9:16