Options; Stabilized Power Supply; Dc-Dc Converter - HBM ME50S6 Bedienungsanleitung

18
5

Options

5.1 Stabilized Power Supply

The module KM001 can be used to connect the measuring amplifier to a sym-
metrical supply voltage "15.6...25.0 V. When installing the module KM001,
attention must be paid to the marking. The jumpers BR3 and BR4 have to be
configured according to the table below.
Pin assignment:
positive pole
negative pole
supply zero

5.2 DC-DC Converter

The manufacturer can mount a DC-DC converter onto the board for the op-
eration of a simple operating voltage with simultaneous electrical isolation be-
tween operating voltage and measuring circuit. The voltage converter can be
delivered for operation +9...+35 V (for unstabilized voltage).
Pin assignment:
positive pole
negative pole
When using the modules KM001 resp. a DC-DC converter attention has to
be paid to the jumpers BR3 and BR4 which are re-configured.
With module KM001 resp. DC-DC converter
HBM
. . . . . . . . pin 15a
. . . . . . . pin 16a
. . . . . . . . . pin 19c
. . . . . . . . pin 4a
. . . . . . . pin 5a
factory settings:
ME50S6
1 2 3
BR3 I
BR4
I
1 2 3
I
BR3
I
BR4
A0260−3.0 en/de/fr