Programmes; Settings - IKEA LAGAN Bedienungsanleitung

ENGLISH

Programmes

Programme
Heavy soil
2)
Crockery, cut-
lery, pots and
pans
Normal soil
Crockery and
cutlery
Normal soil
3)
Crockery and
cutlery
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the values.
2) This programme is indicated for heavy soil loading to get the sufficient cleaning results on pots and pans.
3) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with
normal soil. (This is the standard programme for test institutes).
Information for test institutes
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com

Settings

Programme selection mode and user
mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings can
be changed:
• The level of the water softener according
to the water hardness.
Degree of soil Programme pha-
Type of load
• Prewash
• Wash 70 °C
• Rinses
• Dry
• Prewash
• Wash 65 °C
• Rinses
• Dry
• Prewash
• Wash 50 °C
• Rinses
• Dry
ses
Duration
(min)
130 - 150 1.3 - 1.4
100 - 110 1.2 - 1.6
195
Write down the product number (PNC) that
is on the rating plate.
• The activation or the deactivation of the
acoustic signal for end of programme.
These settings will be saved until you
change them again.
How to set the programme selection mode
The appliance is in programme selection
mode when all the programme indicators
are on.
Consumption values
1)
Energy
(kWh)
13 - 15
15 - 16
1.02 15
8
Water
(l)