Ear Hook Wearing Styles; Changing Wearing Styles; Receive Volume Button Reorientation; Operating The Headset - Jabra GN9330e USB Anleitung

GN9350e GN9330e GN9330e USB
3.3 Ear hook wearing styles
You can choose to wear the headset on either the
left or right ear. The headset can be rotated 360˚.
Changing ear hook wearing side
1. Flip the ear hook over.
2. Rotate the ear hook 180°.
GN9350e GN9330e GN9330e USB
3.4 Changing wearing styles
All wearing styles (headband, neckband and ear hook) are inter-
changeable.
To change any wearing style (for example, from headband to ear hook):
1. Unclip headset from the current wearing style.
2. Affix the new wearing style.
GN9350e GN9330e GN9330e USB
3.5 Receive volume button reorientation
By default, the headset is set-up for wearing on the right ear. This means the volume
control is pushed up to increase the volume, and pushed down to decrease the volume. If
you change the wearing ear of the headset, you may also want to change the orientation of
the volume control so that volume is still increased by pressing the volume control up.
To change the headset's volume control button orientation:
1. Make sure there is no link between the headset and the base, (indicator on headset is not
flashing).
2. Press the headset's mute button for 10 seconds.
–> The headset's link indicator will light.
3. Determine how you prefer to increase volume (pushing the control either up or down).
4. Press the volume control either up or down (according to preference) until the headset's
link indicator turns off.

4. Operating the headset

GN9350e GN9330e GN9330e USB
4.1 Making/ending calls via telephone with RHL/EHS function
1. Ensure telephone mode is selected.
10
2. Remove headset from base, or press headset's talk button if already wearing it.
–> RHL/EHS function will activate (handset lifts/telephone line connection opens).
3. Dial desired number.
4. Replace headset in base, or press the headset's talk button.
–> RHL/EHS function will deactivate (handset lowers/telephone line connection closes).
GN9350e GN9330e GN9330e USB
4.2 Answering calls via telephone with RHL/EHS function
1. The telephone rings.
2. Remove headset from base, or press the headset's talk button.
–> The call will be connected (handset lifts/telephone line connection opens).
Important: During an incoming call, your headset will automatically change to the required mode,
depending on whether the call is coming via the desk phone (telephone) or via VoIP (USB). After
the call, it will revert to the default mode you selected earlier. The initial factory-set mode is the
telephone mode.
GN9350e GN9330e GN9330e USB
4.3 Conference calling
Conference calling lets several headsets join together for a call. The primary headset (A) + 3
extra headsets (B) can join a conference call initiated by the primary headset. (See illustration.)
Making conference calls
1. Remove primary headset from base; make sure link is established. Indicators on base and
headset are flashing.
2. Place secondary headset in primary headset's base.
–> Primary base's telephone and USB mode indicators, and secondary headset's link indi-
cator, will light for 2 seconds.
3. Remove secondary headset from primary headset's base.
4. After a 4-pitch tone is heard in the primary headset, press its talk button.
5. When the GN9350e is linked up to more than one headset in conferencing mode
the product is not TT4 compliant.
A
B
2 sec
B B B
A
B
A
A
11