Therabody SmartGoogles Bedienungsanleitung Seite 10

7. Care, Cleaning, and Charging
EN
Device Maintenance
The following maintenance instructions are important to ensure that your device continues to work as it was designed. Failure to follow
these instructions may cause your device to stop working.
Cleaning the Device
Read the following instructions carefully before cleaning the device to ensure longevity of the device and its components.
1. Visually inspect the device for any obvious signs of debris build-up.
2. Wipe the device with a non-abrasive, lint-free damp cloth or alcohol-free cleansing wipe.
3. Dry the device with a non-abrasive, lint-free cloth.
4. After cleaning, allow the device to dry thoroughly before storing or beginning another treatment. The device is NOT waterproof or
machine washable. Do not allow excess liquids or water to enter the product.
5. A properly cleaned device should have no visible signs of debris or moisture.
Note: Do not submerge the device in water or clean it under running water. Do not allow the device to come into contact with corrosive
solutions, which can damage the device's appearance and function.
Charging the Device
1. The device is USB-C enabled and comes with a charging cable. Before charging the device, ensure that it is powered off.
2. Connect one end of the charging cable to the USB-C charging port on the device. It is located on the side of the device, behind the
power button. Connect the other end of the charging cable to a power adapter.
3. The LED light, next to the USB-C port, will indicate the battery status when the device is on or charging. Turn on the device or press
the power button to check the battery status.
• Flashing Orange: Low battery
10