Gossen SIXTOMAT digital Gebrauchsanleitung Seite 40

3.4 Setting and measuring correction values
(See Section 3.4.4 Important remarks concern-
ing correction values)
3.4.1 Setting correction values
Select OR with the function
(The last valid correction
the display)
Enter or change the correction
the value buttons.
The extension factor is shown in the right-
hand digital display,
value in stops in the left-hand section.
Enter in 1/1Oth stops (small figure) within a
range of ± 7.9 exposure value stops.
A figure preceded by "—"indicates an expo-
sure extending correction.
Example:
- 3,1 stops equal factor 8.6
In the event of an exposure
rection, only the left-hand
an exposure value difference in stops.
40
buttons.
value appears on
value with
and the correction
shortening cor-
display appears as
t f
ISO