Foot care head
1. Apply liquid hand soap to the central part of the file.
2. Pour a small amount of water on the file and turn the switch on.
3. Rinse any debris thoroughly with water or lukewarm water.
4. After turning the switch off, remove the frame and rinse inside.
5. Wipe with a dry cloth and dry in a well-ventilated location.
3
4
Replacing the outer foil
We recommend replacing the outer foil [H9] every year and
the inner blade every two years. Remove the outer foil of the
shaver head [H] only when replacing it.
1. While pushing the outer foil gently with the fingers, use a
fingernail to release the plastic panel (b) on the blade
from the hooks (a) on the inside of the frame.
2. The new outer foil should be slightly bent and pushed in
until it is hooked in the frame.
1
20
5
2
Replacing the file
The file lifetime is approximately 1 year (assuming a single use
every 2 weeks with approximately 10 minutes per use). We
recommend replacing the file about once a year.
1. Press down with your finger and release the file.
2. Align the
shaped part with the
down.
mark side and press