TOOLCRAFT LDM100H Bedienungsanleitung Seite 43

• Never mix batteries and rechargeable batteries.
Use either batteries or rechargeable batteries.
• For proper disposal of batteries/rechargeable
batteries, please read the chapter "Disposal".
• Ensure that you have chosen the right refer-
ence edge of the device before measuring. For
measurements from the laser exit edge or from
the hand strap, choose the correct reference via
button 8 and check your settings in the display
at the upper left.
• Inform all persons who may work in the meas-
urement range during the measurement of your
planned measurement and be attentive. If there
are any persons, animals or sensitive objects
(e.g. optical electronics) in the measurement
range, discontinue your measurement and
switch off the device. The high-energy light of
the laser may cause severe damage and injury.
• Keep the device in the enclosed bag when it is
not in use. To minimise the consequences of ac-
cidental activation, insert the laser meter into the
protective sleeve with its laser exit opening first.
• Removing the batteries while the device is
switched on may cause measured values to be
lost and not be saved permanently in the log.
Switch the device off to replace the batteries.
The log is then preserved even if you (briefly)
remove the batteries.
• Measure only in areas that you can view com-
pletely and where you do not endanger or dis-
tract anyone.
43