N-Gear The Flash 1210 Bedienungsanleitung Seite 3

MAIN TECHNICAL
B t 00
1. Press the "MODE" button to select Bluetooth
from remote control "blue" will show on the display
2.Scan from your phone, tablet, notebook
device to listen Audio files through
3.Disconnect from speaker when finished
Using the Microphone
1.To use the speaker's microphone input, plug the 1/4" connector
microphone or microphone cable(a
microphone input jack.
2. Turn the Mic Volume knob to adjust microphone
3. Turn the Mic Echo knob to adjust microphone
sing Aux INE 3.5mm
I .To use the speaker's AUX input, plug the 3.5mm connector
cable into the AUX IN input jack and connect the other 3.5mm connector
the auxillery cable to your external
2. To select Aux use "MODE" button on unit Control panel or from remote
control "LINE" will show on display.
Charging the Battery
Connect the power adaptor and the LED indicator
and turn blue when fully charged. Use the original
PARAMETER
mode on unit Control panel or
for "THE FLASH 1210 " and pair the
speaker
listening
Input
of a wired
6.3mm wired microphone included)into
volume
echo
of an auxillery
audio playing device
will turn RED while charging
adapter only!
SPECS
Peak
Power input DC 9V/1 ,5A
Peak
RMS
Woofer
Tweeter
S/N Ratio
the
Battery
Battery
Battery
Battery
Battery
of
Battery
Battery
Bluetooth
Bluetooth
Wireless
USB MP3 Max 64GB - 20.000
MicroSD/TF
Dimensions:
Net Weight
FEATURES
1210
Power 30W
Power PMPO 300W
Power 25W
size +impedance 12 inch 30hm
size +impedance 1 inch
272dB
type
capactity 2000 mAh
Playing Time (Max vol.) 2 hours
Playing Time (50% vol.) 3.5 hours
Playing Time (Low vol.) 6 hours
Charging Time 3 hours
weight 100gr
Version 2.1
frequency 2400-2483.5MHz
Mic frequency 210.3MHz
MP3 Max 32GB - 10.000 songs
350 x 285 x 540
5300gr
songs
mm