If no switching times have been programmed for the
17
holiday program, the holiday symbol starts flashing
when the
button is pressed.
Refer to 7.1 for information on programming
switching times for the holiday program
Press
once, the following display appears:
The cursor for the current day of the week
starts flashing.
If you press the
key at this point, the holiday
program (Ho = holiday) is set for an unspecified
period (refer to 7.0 c)
a)
If the holiday program is to start on day 3
(Wednesday), as in our example, enter the duration
of the holiday in days with the "Select" key.
If the "Select" key is held down for longer than 2
seconds, the "fast forward" mode is activated
(scrolling), e.g. 10 days.
GB