7.
= holiday program
a) The holiday program has priority over the "standard weekly
program", refer to 4.4
b) The
symbol can only be assigned to switching times which
have been selected for all 7 day of the week.
c) The holiday program is only activated if:
– switching times have been stored in the way described under 7.1
– the duration of the holiday has been preselected (1 ... 99 days)
– or has been specified without a time limit
d) The start of the holiday program can be the current day of the
week, or can be preset up to 6 days in advance.
7.1 Switching times for the holiday program are entered in the same way
as "normal" switching commands, refer to 4.4,
but the
symbol must also be entered for each switching time in the
holiday program.
15
GB