GOAL ZERO YETI TANK Installationsanleitung Seite 7

Lid Disassembly
1. Remove the lid assembly and set it on a level, smooth work surface.
2. Remove the fuse holder cover by grabbing and squeezing the sides while pulling up .
3. Remove the two 9/16" nuts from the fuse holder .
4. Remove the wires and fuse from the fuse holder .
12
5. Remove the cables from the lid .
6. These items will not be reused and can be discarded in the household trash. Note: If an old fuse is installed the
holder may be clear or black.
13