Changing The Single Hotkey - G&D FIBREVision-MC4-ARU Installation Und Betrieb

Changing the single hotkey

Press the hotkey and the
FIBREVision system.
If an application program or another G&D device uses the same hotkey within the
cascade, the hotkey can be changed.
NOTE:
The single hotkey
How to change the current hotkey:
1. Press Hotkey+Backspace
mode. If the hotkey delay is active, press the key combination for seven
seconds.
2. Press one of the setup keys listed below to activate a certain hotkey:
 activates the hotkey
Ctrl
Alt  activates the hotkey
Alt Gr  activates the hotkey
Win  activates the hotkey
Shift  activates the hotkey
1. Use the terminal emulator to establish the connection to the FIBREVision
system.
2. Use the
arrow
3. Press the
Space
 activates the hotkey
Ctrl
 activates the hotkey
Alt
Alt Gr  activates the hotkey
 activates the hotkey
Win
Shift  activates the hotkey
4. Press the S key to save the settings.
Related topic:
 Using single or double hotkeys on page 20
key simultaneously to start the setup mode of the
Backspace
Ctrl is preset at default.
(default:
Ctrl
Alt
Alt Gr
Win
Shift
keys to select the row
key (repeatedly) to activate a certain hotkey:
Ctrl
Alt
Alt Gr
Win
Shift
Ctrl+Backspace ) to activate the setup
.
Hotkey
G&D FIBREVision · 21
Configuration