Ps/2 Autorepeat Of Computer Modules - G&D FIBREVision-MC4-ARU Installation Und Betrieb

KEY COMBINATIONS
Ctrl+Alt+F9
Ctrl+Alt+F10
Ctrl+Alt+F11
Ctrl+Alt+F12
Ctrl+Alt+NUM+
Ctrl+Alt+NUM-
Ctrl+Alt+NUM*
Ctrl+Alt+Pause
Pause+A

PS/2 AutoRepeat of computer modules

When pressing a key for a longer time, the computer module repeatedly sends the
scancode of the pressed key to the connected computer (AutoRepeat) as long as you
press the key.
Some special keyboards can be configured to prevent Auto-Repeat. When using
such a keyboard, you can disable the setting
IMPORTANT:
The setting only has an effect if the keyboard and mouse signals of
the workstations are transmitted to the computer by using the PS/2 interfaces
Mouse CPU and Keyb. CPU
NOTE: This setting can be enabled on the setup menu only.
How to enable/disable the PS/2 AutoRepeat function of computer modules:
1. Use the terminal emulator to establish the connection to the DVIVision system.
2. Use the
arrow
3. Press the
Space
Yes  When pressing a key for a longer time, the scancode of the
pressed key is sent repeatedly to the computer (standard).
No  The scancode is sent only once no matter how long you
press the key.
4. Press S to save your settings.
»SOLARIS SHORTCUT KEY« OF SUN KEYBOARDS
Find
Cur
Help
Mute
Loud
Quiet
Compose
Shutdown
Stop
.
keys to select
PS/2 AutoRepeat
key (repeatedly) to enable a particular hotkey:
PS/2 AutoRepeat on the setup menu.
.
G&D FIBREVision · 27
Configuration