Picture Control - Eneo VKCD-1324B/IR Installation Und Betriebsanleitung

6.7 PICTURE CONTROL

To enter PICTURE CONTROL menu, press
PICTURE CONTROL Default
WHITE BALANCE ATW
NORMAL
COLOR SELECT COLOR1
VIVID OFF
BRIGHTNESS
SHARPNESS 2
SATURATION 1
GAMMA 45
button at MAIN > PICTURE CONTROL.
Descriptions
Sets ATW Normal, ATW Desat, ATW Xtnd or MANUAL.
ATW NORMAL – Compensates automatically in range of 800K-7500K
ATW DESAT – Compensates automatically in range of 000K-000K
In the range of 000-800K and 7500-000K, white balance is gradually
compensated.
ATW Xtnd – Compensates automatically in range of 000K-000K.
MANUAL – White balance can be adjusted by either KELVIN or R/B
Provides three colour tones.
Generates the vivid image with a little stronger colour and contrast.
If VIVID is set to ON, WDR preset changes to NORMAL.
BRIGHTNESS level is a kind of video output gain and is different from the iris
level control. It can be set to MID-LOW, MIDDLE, MID-HIGH, HIGH and LOW.
If it is set too high, the dynamic range is decreased.
Increase or decrease the sharpness of the picture.
Too much sharpness can make image harsh and show more noise as well as
line flicker at the edge of object in the picture.
High value makes colour rich and vice versa.
Lower value improves the gain of the dark area but the image has less
contrast. Higher value reduces the gain of the dark area and makes the
image more dark and contrastive. The image will loose the linearity for too
high value.
36