nedis FNCL10XX20 Bedienungsanleitung Seite 5

Do not let water enter the product.
Do not use the product in wet or damp environments.
Do not cover the product.
Keep the product far away from loose products (e.g. curtains, plastic bags,
paper) that can cover the air inlet easily.
Do not use the product in rooms where flammable liquids or gases are used
or stored.
Do not place the product on moving vehicles or somewhere easy to be
tipped over.
Unplug the power cord when the product is not in use for a long time.
Do not unplug the product by pulling on the cable. Always grasp the plug
and pull.
When using an extension cord, use one which is as short as possible and fully
extended.
Do not use the product using an on/off timer or other equipment
automatically switch the device on.
Do not locate the product immediately below a power outlet.
This product may only be serviced by a qualified technician for maintenance
to reduce the risk of electric
Use
1. Connect the product to a power outlet.
2. Switch A 1 to l.
O
The product spins at low speed.
3. Switch A 1 to "II".
o
The product spins at high speed.
4. Switch A 1 to "O".
O
The product switches off.
Specifications
Product
Article number
Dimensions (l x w x h)
Input voltage
Power input
shock.
Retro Desk
FNCLIOXX20
110 x 265 x 335
AC 220 - 240 V
Max 20 W
5
which can
Fan
50 Hz