cecotec BOLERO DRESSCODE 10900 AUTODOSE INVERTER FULLCOLOR A Bedienungsanleitung Seite 120

ENGLISH
Child Lock
1. The setting of the child lock function can prevent malfunctions or unwanted
incidents.
2. During operation, press and hold the SPEED icon for approximately 3 seconds to
set or cancel the child lock function.
3. After setting the child lock function, its indicator light
cannot be opened and the control panel is locked, the icons remain inactive. The
appliance can only be switched off by pressing the power icon. If the machine is
switched off, the child lock function will be cancelled.
4. If you switch off the appliance and switch it on again, the machine runs the selected
programme directly before switching it off.
Autodose function
In order to activate this function:
- Switch on the washing machine using the power icon.
- Select a washing programme.
- Press the Autodose icon
- The display will show the selected level.
- Pressing again will increase the dosing level.
- The washing machine has 5 dosing levels:
Au > Automatic auto-dosing
L1 > Low auto-dosing
L2 > Average auto-dosing
L3 > High auto-dosing
OFF > Auto-dosing function deactivated
If the function is activated, the appliance detects if the amount of detergent in the
detergent drawer is insufficient, its indicator light will light up on the control panel,
indicating to refill the detergent drawer.
The following programmes are not compatible with the Autodose function:
- Drum Clean Plus
- Spin
- ECO 40-60.
Setting the time of a programme
- Press the + or - icons to adjust the time. The time setting value of a programme
will be shown on the digital display and the appliance will operate according to that
time.
- The Drum Clean Plus and ECO 40-60 programmes do not allow time adjustment.
120
BOLERO DRESSCODE 10900 AUTODOSE INVERTER FULLCOLOR A
BOLERO DRESSCODE 10900 AUTODOSE INVERTER FULLCOLOR STEEL A
BOLERO DRESSCODE 10900 AUTODOSE INVERTER FULLCOLOR ICE BLUE A
will light up, the door