cecotec BOLERO DRESSCODE 10900 AUTODOSE INVERTER FULLCOLOR A Bedienungsanleitung Seite 108

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1.
1. Water supply hose
2. Door
3. Drain hose
4. Body
5. Power cable
6. Detergent/fabric softener drawer
7. Control panel
8. Drum
9. Drain filter
10. Adjustable feet
Accessories
Fig. 2.
1. Instruction manual
2. Cold water supply hose
3. Fixed spanner
4. Transport hole plug
2. BEFORE USE
- Unpack the appliance and keep the original packaging and materials in a safe
place. It will help prevent any damage if the appliance needs to be transported in
the future. In case the original packaging is disposed of, make sure all packaging
materials are recycled accordingly.
- To remove the lower part of the packaging, do not tilt the appliance on its front side.
Carefully tilt to the side. Never place the appliance directly on the floor on its back
or front part.
- Make sure all parts and accessories are present and in good conditions. If there is
any piece missing or not in good condition, contact the official Cecotec Technical
Support Service immediately.
- Keep all packaging materials away from children.
- Before using the washing machine, the appliance shall be calibrated.
- Before the first wash, you must perform a complete washing cycle without laundry
(i.e. with an empty drum).
- Make sure that all pockets are empty. Sharp and rigid items such as coins, brooches,
nails, screws, or stones may cause serious damage to this appliance.
108
BOLERO DRESSCODE 10900 AUTODOSE INVERTER FULLCOLOR A
BOLERO DRESSCODE 10900 AUTODOSE INVERTER FULLCOLOR STEEL A
BOLERO DRESSCODE 10900 AUTODOSE INVERTER FULLCOLOR ICE BLUE A