Beurer BY 110 Gebrauchsanweisung Seite 27

• Press the ( ) button.
• Use the direction buttons (
• Use the direction buttons (
• Confirm using the (OK) button.
7.8 Adding a camera
You can connect one parent unit with up to four cameras.
To add a camera to the parent unit, proceed as follows:
• Press the ( ) button.
• Use the direction buttons (
• Use the direction buttons (
• Confirm using the (OK) button.
• 1, 2, 3, 4 appears on the screen.
• Use the direction buttons (
appears on the screen and the unit searches for a camera.
• Now hold down the PAIR button on the rear of the camera until an acoustic signal is heard
and the transmission image from the camera that has been added appears on the screen.
7.9 Deleting a camera
If you wish to delete the connection to a camera, proceed as follows:
• Press the ( ) button.
• Use the direction buttons (
• Use the direction buttons (
• Confirm using the (OK) button.
• 1, 2, 3, 4 appears on the screen.
• Use the direction buttons (
delete.
• Confirm using the (OK) button.
7.10 Noise sensitivity setting
The noise sensitivity setting on the baby unit determines what you can hear on the parent unit. If
you set the sensitivity level to high (H), you will hear even very quiet noises via the parent unit. If
you set the sensitivity level to medium (M), you will hear medium-loud noises via the parent unit.
If you set the sensitivity level to low (L), you will only hear very loud noises via the parent unit.
To change the sensitivity level, proceed as follows:
• Press the ( ) button.
• Use the direction buttons (
• Use the direction buttons (
dium or L = low).
• Confirm using the (OK) button.
7.11 Selecting the frequency
The baby unit can either transmit to the parent unit at 50 Hz or 60 Hz. The frequency which is
most common in Europe (50 Hz) has been preset. Choosing the correct frequency can help to
reduce screen flickering with artificial lighting.
) / ( ) to select menu item
) / ( ) to select your desired alarm time (2 H, 3 H, 4 H or 5 H).
) / ( ) to select menu item
) / ( ) to select the plus +.
) / ( ) to select a number and confirm with the (OK) button.
) / ( ) to select menu item
) / ( ) to select the minus —.
) / ( ) to select the number of the camera that you wish to
) / ( ) to select menu item
) / ( ) to select your desired sensitivity level ( H = high, M = me-
27
.
.
.
.