Beurer BY 52 Gebrauchsanweisung Seite 13

No LED display
The baby food warmer does not
switch on once it is plugged in.
The temperature on the display
does not increase once the warm-
ing process is started; the device
switches itself o after a while.
The food is not warm at the end
of the warming process.
10. Disposal
For environmental reasons, do not dispose of the device in the household waste at the end of its useful life.
Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance
with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please
contact the local authorities responsible for waste disposal.
11. Technical specifications
Operating voltage:
Power consumption:
Heating time:
Temperature for keeping warm: 35 °C - 85 °C
12. Warranty/Service
Further information on the warranty and warranty conditions can be found in the warranty leaflet supplied.
Mains plug not (correctly)
plugged in or device faulty
No electricity
No water in the device
Not enough water in the device
220–240 V ~ / 50/60 Hz
80 watts
3 - 18 min.
13
Check that the mains plug is
(correctly) plugged in. If there
is still no display, switch o the
device, unplug it and return it to
the retailer.
Check that the mains plug is
correctly plugged in.
Unplug the device, let it cool
down, then fill it with water and
start the warming process as
described in these instructions.
Unplug the device, let it cool
down, then fill it with su cient
water and start the warming
process as described in these
instructions.