Herunterladen Diese Seite drucken

Silvercrest SHAC 2400 C2 Kurzanleitung Seite 9

Vorschau ausblenden Andere Handbücher für SHAC 2400 C2:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
Operation
Heat and blower levels
NOTICE
Run the hairdryer at the highest blower and heat levels for about 2–3 minutes
before first use. This helps to remove any production residues that may remain
in the interior of the appliance.
1) Insert the plug into a power socket.
2) Switch the hair dryer on with the blower level switch 3.
The hair dryer is fitted with two function switches. With these you can separately
select the strength of the air flow (blower level switch 3) and the level of heat
(heat level switch 4):
Blower levels
0
Heat levels
3) After use, switch the appliance off in that you place the blower level switch 3
into position "0". Then remove the plug from the wall socket.
Cool shot function
You can use the cooling level button 5
with low and high airflows as well as with medium and high heat levels. The low
heat setting has no heat function. If you wish to create a cold air stream, press
and hold the cooling level button 5
stream, release the cooling level button 5
Ionisation function
When drying the hair using a hair dryer, the hair takes on a static charge and
begins to „fly".
The ionisation function ensures that this charging of the hair is neutralised and
cancelled. The hair becomes soft, supple, shiny and easier to style.
GB │ IE
6 
The hair dryer is switched off
reduced air flow
full power air flow
low heating level
medium heat level
high heating level
to produce a cool air flow. The works
. When you no longer need the cold air
.
SHAC 2400 C2

Werbung

loading

Diese Anleitung auch für:

377404 2110