Parkside Performance PKLLP 3360 A1 Kurzanleitung Seite 29

(Fig . E)
Locking knob
23 ] [
(Fig . F)
Wall hanging hole
24 ] [
(Fig . H)
Battery pack *
25 ] [
button (charging level)
26 ] [
Charging level LEDs (red/orange/green)
27 ] [
Release button for battery pack
28 ] [
(Fig . I)
Mains cord with mains plug
[ 29 ]
Battery charger (rapid battery charger) *
[ 30 ]
Charging control LED – Red
[ 31 ]
Charging control LED – Green
[ 32 ]
(Fig . K)
Magnet
[ 33 ]
Clamp part
[ 34 ]
Universal mount part
[ 35 ]
(Fig . L)
Laser target plate
36 ] [
Laser target plate magnet
[ 37 ]
Laser target plate back stand
[ 38 ]
(Fig . M)
Internal thread of the universal mount (6 .35 mm)
[ 39 ]
Internal thread of the universal mount (15 .8 mm)
[ 40 ]
* Battery pack and battery charger
25 ] [
the scope of delivery .
02_448696_2301_Short_GB.indd 29 02_448696_2301_Short_GB.indd 29
˜ Technical data
Cordless cross line laser 20V
Rated voltage:
Max . working range:
Max . working range with laser
receiver **:
Self leveling range:
Leveling accuracy:
Leveling time:
Laser colour:
Laser power:
Laser wave length:
Laser class:
Internal thread:
–
–
*
**
***
o
o
are not included in
[ 30 ]
Battery pack
Type:
Rated voltage:
Capacity:
Energy value:
Number of cells:
Frequency performance:
Frequency band:
Temperature:
Use with universal mount :
15 ] [
Use with tripod ***:
The working range may be restricted by environmental
conditions (e .g . bright light) .
A laser receiver is not included in the scope of delivery .
A tripod is not included in the scope of delivery .
INFO:
This product can work with any GREEN-BEAM laser receiver
with a pulse frequency value of 10 kHz (For example: Bosch
Laser Receiver Model: LR 7) .
Check with your authorized dealer before buying a suitable
laser receiver for this product .
PAPS 204 A1 *
Lithium‑Ion
20 V
4 Ah
80 Wh
5
≤ 20 dBm
2400–2483 .5 MHz
max . +50 °C
PKLLP 3360 A1
20 V
max . Ø 30 m *
max . Ø 120 m *
±4°
±0 .2 mm/m
approx . 4 seconds
green
<1 mW
500–540 nm
2
6 .35 mm (¼")
15 .8 mm ( ⁄ ")
5
8
GB/IE 29
7/10/2023 6:07:17 PM 7/10/2023 6:07:17 PM