alphacheck CareSens Dual Bedienungsanleitung Seite 62

Using the Lancing Device
You will need a lancing device in order to collect a blood sample.
You may use the lancing device that is included in the alphacheck
CareSens Dual System or any other medically approved lancing
device.
Cap
Lancet Holder
Adjustable Tip Lancet
Load Confirmation
The lancing device is for use by a single user only and should
•
not be shared with anyone.
Use a soft cloth or tissue to wipe the lancing device. If
•
necessary, a small amount of alcohol on a soft cloth or tissue
may be used.
Caution
To avoid infection when drawing a sample, do not use a lancet
more than once, and:
Do not use a lancet that has been used by others.
•
Always use a new sterile lancet.
•
Keep the lancing device clean.
•
Note
Repeated puncturing at the same sample site may cause pain or
skin calluses (thick hard skin). Choose a different site each time
you test.
38 www.bergermed.de
Ejection System
Sliding Barrel
Release Button
Window
Preparing the Lancing Device
Step 1
Wash hands and sample site with
soap and warm water. Rinse and dry
thoroughly.
Step 2
Unscrew and remove the
lancing device tip.
Step 3
Firmly insert a new lancet into the lancet
holder. Hold the lancet firmly. Gently
twist to pull off protective disk. Save
disk to recap lancet after use. Replace
lancing device tip.
Step 4
Turn the adjustable tip until it is aligned
with the load confirmation window and
release button as shown.
www.bergermed.de 39