Worx Sonicrafter WT665 Originalbetriebsanleitung Seite 8

different from those intended could result in a
hazardous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
SAFETY INSTRUCTION FOR
CUTTING
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
SYMBOLS
8
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Oscillating Multi-Tool
Make sure the tool is unplugged prior
to changing accessories.
Before working with your tool make
sure that no power cords will be
damaged.
Avoid danger of injury from the sharp
edges of the accessories.
Accessories can become very hot
while working, presenting danger of
burns!
Wear protective gloves
High oscillation frequency.
Low oscillation frequency.
Lock
Unlock
Waste electrical products must not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
EN