Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4
Commissioning
▶ Scan the QR codes of the individual controls.
2.
Fig. 12 Example Scan individual control radiator QR code
▶ Assign individual controls and repeaters to the rooms using the
ProWork app.
▶ Transfer data to the system.
After transferring the data (QR code and room data) from the ProWork
app to the system, it is then necessary for the individual controls and, if
applicable, the repeater to actively report to the system via radio (868
MHz) for final integration. To do this, a button must be pressed on the
individual control and repeater.
▶ Follow the instructions in the app.
The individual controls and, if applicable, the repeaters then report their
QR code data to the system, which synchronises the data. If the
synchronisation is positive, the relevant individual control is integrated
into the system.
The device overview in the app can then be used to check the status of
the respective devices and whether the connection was successful. The
device overview shows a list of all individual controls and repeaters that
are connected to the system.
If the connection process has not yet been completed, Prepared for
connection is displayed in the app. In this case, select the relevant
device in the app and follow the instructions of the app.
36
4.3
Recommendation for use of repeater
The wireless range within a building depends on structural (concrete
ceilings, thick walls, etc.) and local conditions (Item MX300/MX400,
...). Therefore, no generalised distance can be specified for indoor
areas.
1.
The range of WLAN (2.4 GHz) and radio (868 MHz) differ greatly. Radio
generally has a significantly greater range than WLAN.
The radio symbol in the app shows how strong the wireless connection
between the individual control and the system (MX300/MX400) is.
0010047354-001
If the wireless range is not sufficient, the range can be extended by using
the repeater. Even if the wireless connection to one or more individual
controls is weak, we recommend the use of a repeater for stability
reasons.
Design conditions affect the wireless range. For example, closing a door
can lead to a loss of connection if this individual control already only had
a weak wireless connection when the door was open.
The strength of the wireless connection can be easily checked using the
ProWork app. This is possible using the device overview. This is always
displayed after the app has transferred the data from the individual
controls to the system. Optionally, the device overview can also be
called up separately in the app.
4.4
Commissioning with the MyBuderus app
The system must first be configured accordingly ( Chapter 4.1
and 4.2). If the individual control is not activated in the system
operation, it cannot be displayed and used in the MyBuderus app.
Use of the MyBuderus app is optional, but opens up additional functions
and options ( Chapter 6.3).
To use the MyBuderus app, MX300/MX400 must be connected to the
Internet and the MyBuderus app downloaded from the relevant app
store ( Installation instructions for MX300/MX400).
Connecting individual controls to the system with the MyBuderus
app
The MyBuderus app also allows you to connect individual controls and
repeaters to the system, manage them and make changes, for example
to the room name or room assignment:
▶ Follow the instructions in the MyBuderus app.
SRC plus – 6721856015 (2024/09)
Werbung
