Description of functions
The machine has an electric motor and a
plastic housing. There are different types
of mowing and a 6-step cutting height ad-
justment. The cutting tool rotates parallel
to the cutting plane.
Please refer to the descriptions below for
information on how the operating ele-
ments work.
Technical data
Electric Lawnmower PRM 1500 B2
Input power of motor ................... 1500 W
Mains power supply ......... 230 V∼; 50 Hz
No-load rotation speed n
Cutting width ............................. ≈ 360 mm
Cutting height .......................... 25 - 75 mm
Protection class ..⧈ II ( double insulation )
Protection type .....................................IPX4
Weight .............................................≈14 kg
Grass catcher volume .......................≈ 40 l
Sound pressure level (L
...................................... 69.8 dB; K
Sound power level (L
– Guaranteed ...................................92 dB
– Measured ......... 90.1 dB; K
Vibration at U-handle (a
............................ 2.337 m/s²; K=1.5 m/s²
Levels of noise and vibration were determ-
ined according to the standards and regu-
lations in the declaration of conformity.
The specified total vibration value and the
stated noise emission value have been
measured according to a standardised
test method and can be used to compare
one power tool with another. The specified
total vibration value and the stated spe-
cified noise emission value can also be
used for a provisional assessment of the
load.
WARNING! The vibration and noise
emissions may deviate from the specified
−1
..... 3400 min
0
)
pA
=3 dB
pA
)
WA
=1.85 dB
WA
)
h
values during actual use of the power tool,
depending on how the power tool is be-
ing used. Try to keep the exposure to vi-
brations as low as possible. An example
of a measure to reduce vibration exposure
is limiting the working hours. All parts of
the operating cycle have to be considered
while doing so (for example, times when
the power tool is switched off and times
when it is switched on but running without
any load).
Safety information
This section deals with the basic safety in-
structions for using the device.
Meaning of the safety
information
DANGER! If you do not observe this
safety instruction, an accident will occur.
The result of which is severe bodily injury
or death.
WARNING! If you do not observe
this safety instruction, an accident may
occur. The result of which is likely severe
bodily injury or death.
CAUTION! If you do not observe this
safety instruction, an accident will occur.
The result of which is likely minor or mod-
erate bodily injury.
NOTICE! If you do not observe this safety
instruction, an accident will occur. The res-
ult of which is possible damage to prop-
erty.
Pictograms and symbols
Symbols on the device
Attention!
Read the instruction manual
GB
MT
25