Inserting The Bobbin Case; Threading The Upper Thread - Medion MD 11836 Bedienungsanleitung

Inserting the bobbin case

Threading the upper thread

EN-12
• Hold the bobbin case so that the finger of the case is pointing up-
wards. Open the rocking arm of the bobbin case.
• Put the bobbin case on the central pin and press the case in ca-
refully until the finger of the bobbin case enters the shuttle track
ring.
• Let go of the flap and press on the bobbin case.
• Close the bobbin case cover (18).
Please read the following instructions carefully as an incorrect se-
quence or thread guiding can lead to broken threads, missed stit-
ches and gathered fabric.
A diagram of how to guide the thread is provided on the front
flap (21); you can also use this drawing as a guideline.
• Before threading the needle, raise the needle to its highest posi-
tion by turning the hand wheel (10) and raise the sewing foot le-
ver (15) to its highest position.
• Place a cotton reel on one of the cotton reel holders (7), making
sure the thread comes from behind the cotton reel.
• Hold the cotton reel with your right hand.