Maintenance And Care - Flex GE 5 Originalbetriebsanleitung

Maintenance and care

WARNING!
Before performing any work, pull out
the mains plug.
Cleaning
WARNING!
Do not use water or liquid detergents.
Regularly blow out the housing interior

and motor with dry compressed air.
Blow out the sanding head and gimbal

bearing with dry compressed air.
Replacing Velcro or backing pad
Take hold of the sanding plate together

with the sanding head to prevent
the sanding plate from turning.
Turn the screw in an anti-clockwise

direction and remove.
Disassemble the sanding head.

24
Replace parts.

Assemble sanding head in reverse

sequence.
Replacing the brush ring
Remove the sanding head (see section

"Replacing Velcro or backing pad").
Loosen the retaining screws.

Take the ring out of the housing.

Insert a new brush ring into the housing

and screw in the retaining screws.
Assemble sanding head in reverse

sequence.
GE 5/GE 5 R