Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Care; Disposal Information - Flex XFE 7-12 80 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für XFE 7-12 80:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

XFE 7-12 80
order to achieve good polishing results
and to prolong the service life of the tool.
– In the case of sensitive surfaces (e. g. car
paint) do not work aggressively, but at low
speeds and with low contact pressure.
– If using a polishing paste, use the respec-
tive tool for each paste.
– Sponges can be washed in the washing
machine.

Maintenance and care

WARNING!
Before carrying out any work on the polisher,
always pull out the mains plug.
Cleaning
WARNING!
If metals are work over a prolonged period,
conductive dust may become deposited
inside the housing. Impairment of the pro
tective insulation! Operate the power tool
via a residual-current-operated circuit-brea
ker (tripping current 30 mA).
Regularly clean the power tool and venti-
lation slots. Frequency of cleaning is
dependent on the material and duration of
use.
Regularly blow out the housing interior
and motor with dry compressed air.
Carbon brushes
The polisher features cut-off carbon brushes.
When the wear limit of the cut-off carbon
brushes is reached, the polisher switches off
automatically.
NOTE
Use only original parts supplied by the
manufacturer for replacement purposes.
If non-original parts are used, the guarantee
obligations of the manufacturer will be dee
med null and void.
When the polisher is being used, the carbon
brushes can be seen sparking through the
rear air inlet apertures.
If the carbon brushes spark excessively,
switch off the polisher immediately. Take the
polisher to a customer service workshop aut-
horised by the manufacturer.
Gears
NOTE
Do not loosen the screws on the gear head
during the warranty period. Non-compliance
will deem the guarantee obligations of the
manufacturer null and void.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Spare parts and accessories
For other accessories, in particular tools
and polishing aids, see the manufacturer's
catalogues.
Exploded drawings and spare-part lists
can be found on our homepage:
www.flex-tools.com

Disposal information

-
WARNING!
Render redundant power tools unusable
-
by removing the power cord.
Only for EU countries
Do not dispose of electric tools toge-
ther with household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electro-
nic equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
NOTE
Please ask your dealer about disposal opti
ons for redundant power tools.
-
-
19

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis